A
  • Afshar, Mahmoud Exergoeconomic Evaluation of LNG and NGL Co-production Process Based on the MFC Refrigeration Systems [Volume 5, Issue 3, 2016, Pages 45-61]
  • Ahmadi, Alireza A Numerical Study of the Sour Gas Reforming in a Dielectric Barrier Discharge Reactor [Volume 5, Issue 4, 2016, Pages 36-52]
  • Ahmadi, Yaser The Effect of Temperature and Injection Rate during Water Flooding Using Carbonate Core Samples: An Experimental Approach [Volume 5, Issue 4, 2016, Pages 18-24]
  • Akhtar, Naveed Application of Well Log Analysis to Assess the Petrophysical Parameters of the Early Eocene Sui Main Limestone (SML) in Kharnhak-1 Well, Middle Indus Basin, Pakistan [Volume 5, Issue 2, 2016, Pages 1-20]
  • Amin, Fatemeh Assessing the Asphaltene Adsorption on Metal Oxide Nanoparticles [Volume 5, Issue 3, 2016, Pages 62-72]
  • Ansarinasab, Hojat Exergoeconomic Evaluation of LNG and NGL Co-production Process Based on the MFC Refrigeration Systems [Volume 5, Issue 3, 2016, Pages 45-61]
  • Anvaripour, Bagher Application of Modified LECA in Removing Nickel from Wastewater [Volume 5, Issue 1, 2016, Pages 1-12]
  • Awais, Muhammad Application of Well Log Analysis to Assess the Petrophysical Parameters of the Early Eocene Sui Main Limestone (SML) in Kharnhak-1 Well, Middle Indus Basin, Pakistan [Volume 5, Issue 2, 2016, Pages 1-20]
B
  • Babaluo, Ali Akbar Hydroisomerization of n-Pentane over Pt/Mordenite Catalyst: Effect of Feed Composition and Process Conditions [Volume 5, Issue 2, 2016, Pages 84-99]
  • Badizad, Mohammad Hasan Simulation and Assessment of Surfactant Injection in Fractured Reservoirs: A Sensitivity Analysis of some Uncertain Parameters [Volume 5, Issue 1, 2016, Pages 13-26]
  • Bahramipanah, Niloufar Anti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method [Volume 5, Issue 4, 2016, Pages 68-76]
  • Bayati, Behrouz Hydroisomerization of n-Pentane over Pt/Mordenite Catalyst: Effect of Feed Composition and Process Conditions [Volume 5, Issue 2, 2016, Pages 84-99]
  • Behrouz, Turaj A Novel Integrated Approach to Oil Production Optimization and Limiting the Water Cut Using Intelligent Well Concept: Using Case Studies [Volume 5, Issue 1, 2016, Pages 27-41]
C
  • Charchi Aghdam, Nazanin Hydroisomerization of n-Pentane over Pt/Mordenite Catalyst: Effect of Feed Composition and Process Conditions [Volume 5, Issue 2, 2016, Pages 84-99]
D
  • Danaee, Iman Effects of Surface Treatment on Corrosion Resistance of 304L and 316L Stainless Steel Implants in Hank’s Solution [Volume 5, Issue 1, 2016, Pages 65-72]
  • Danaee, Iman Anti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method [Volume 5, Issue 4, 2016, Pages 68-76]
  • Derikvand, Zeinab An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir [Volume 5, Issue 4, 2016, Pages 1-17]
E
  • Ejtemaei, Mahboobeh Hydroisomerization of n-Pentane over Pt/Mordenite Catalyst: Effect of Feed Composition and Process Conditions [Volume 5, Issue 2, 2016, Pages 84-99]
  • Eshraghi, Seyed Ehsan Characterization of Reservoir Heterogeneity by Capacitance-resistance Model in Water-flooding Projects [Volume 5, Issue 3, 2016, Pages 1-13]
F
  • Fallahnejad, Gholamreza Asphaltene Deposition Modeling during Natural Depletion and Developing a New Method for Multiphase Flash Calculation [Volume 5, Issue 2, 2016, Pages 45-65]
  • Fanaei, Mohammad Ali Modeling and Simulation of Claus Unit Reaction Furnace [Volume 5, Issue 1, 2016, Pages 42-52]
  • Farzam, Mansoor Effects of Surface Treatment on Corrosion Resistance of 304L and 316L Stainless Steel Implants in Hank’s Solution [Volume 5, Issue 1, 2016, Pages 65-72]
  • Farzam, Mansoor Preparation and Characterization of Structure and Corrosion Resistivity of Polyurethane /Montmorillonite/Cerium Nitrate Nanocomposites [Volume 5, Issue 2, 2016, Pages 100-110]
G
  • Gandomkar, Asghar An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir [Volume 5, Issue 4, 2016, Pages 1-17]
  • Ganjovi, Alireza A Numerical Study of the Sour Gas Reforming in a Dielectric Barrier Discharge Reactor [Volume 5, Issue 4, 2016, Pages 36-52]
  • Ghaemi, Ahad Modeling and Simulation of Kuhni Extraction Column Using a Rate-based Model [Volume 5, Issue 4, 2016, Pages 53-67]
  • Ghanavati, Saeid Effects of Surface Treatment on Corrosion Resistance of 304L and 316L Stainless Steel Implants in Hank’s Solution [Volume 5, Issue 1, 2016, Pages 65-72]
  • Ghazanfari, Mohammad Hosein An Influence of Polymer-Alkaline and Nanoparticles as Chemical Additives on the Immiscible Displacement and Phase Relative Permeability [Volume 5, Issue 3, 2016, Pages 14-31]
H
  • Haghighi, Mohammad Hydroisomerization of n-Pentane over Pt/Mordenite Catalyst: Effect of Feed Composition and Process Conditions [Volume 5, Issue 2, 2016, Pages 84-99]
  • Hamid, Sardar Application of Well Log Analysis to Assess the Petrophysical Parameters of the Early Eocene Sui Main Limestone (SML) in Kharnhak-1 Well, Middle Indus Basin, Pakistan [Volume 5, Issue 2, 2016, Pages 1-20]
  • Hassanbeygi, Mehdi The Effect of Temperature and Injection Rate during Water Flooding Using Carbonate Core Samples: An Experimental Approach [Volume 5, Issue 4, 2016, Pages 18-24]
  • Honarvar, Bijan An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir [Volume 5, Issue 4, 2016, Pages 1-17]
I
  • Ishaq, Muhammad Application of Well Log Analysis to Assess the Petrophysical Parameters of the Early Eocene Sui Main Limestone (SML) in Kharnhak-1 Well, Middle Indus Basin, Pakistan [Volume 5, Issue 2, 2016, Pages 1-20]
  • Ivakpour, Javad Three-component Distillation Columns Sequencing: Including Configurations with Divided-wall Columns [Volume 5, Issue 2, 2016, Pages 66-83]
J
  • Jaafarzadeh, Nematollah Application of Modified LECA in Removing Nickel from Wastewater [Volume 5, Issue 1, 2016, Pages 1-12]
K
  • Kalantari Meybodi, Mahdi A Novel Technique for Determination of the Onset of Alkane Induced Asphaltene Precipitation Using Accurate Density Measurements [Volume 5, Issue 4, 2016, Pages 25-35]
  • Kanani, Maryam Anti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method [Volume 5, Issue 4, 2016, Pages 68-76]
  • Karimi, Iman Design and Practical Implementation of a New Markov Model Predictive Controller for Variable Communication Packet Loss in Network Control Systems [Volume 5, Issue 1, 2016, Pages 53-64]
  • Kasiri, Norollah Three-component Distillation Columns Sequencing: Including Configurations with Divided-wall Columns [Volume 5, Issue 2, 2016, Pages 66-83]
  • Kazemzadeh, Yousef An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir [Volume 5, Issue 4, 2016, Pages 1-17]
  • Khalili-Garakani, Amirhossein Three-component Distillation Columns Sequencing: Including Configurations with Divided-wall Columns [Volume 5, Issue 2, 2016, Pages 66-83]
  • Kharrat, Riyaz Asphaltene Deposition Modeling during Natural Depletion and Developing a New Method for Multiphase Flash Calculation [Volume 5, Issue 2, 2016, Pages 45-65]
  • Kharrat, Riyaz The Effect of Temperature and Injection Rate during Water Flooding Using Carbonate Core Samples: An Experimental Approach [Volume 5, Issue 4, 2016, Pages 18-24]
  • Khosravi Nikou, Mohammadreza A Consequence Analysis of the Explosion of Spherical Tanks Containing Liquefied Petroleum Gas (LPG) [Volume 5, Issue 3, 2016, Pages 32-44]
M
  • Maddahy, Mohammad Hosein Anti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method [Volume 5, Issue 4, 2016, Pages 68-76]
  • Mahboobi, Farzad The Effect of Simultaneous Incorporation of PTFE Nanoparticles and Carbon Nanotubes on the Tribological Behavior of Ni-P Coating [Volume 5, Issue 3, 2016, Pages 73-81]
  • Masihi, Mohsen An Influence of Polymer-Alkaline and Nanoparticles as Chemical Additives on the Immiscible Displacement and Phase Relative Permeability [Volume 5, Issue 3, 2016, Pages 14-31]
  • Masoudi, Rahim A Novel Integrated Approach to Oil Production Optimization and Limiting the Water Cut Using Intelligent Well Concept: Using Case Studies [Volume 5, Issue 1, 2016, Pages 27-41]
  • Masoumi, Amir Salar Characterization of Reservoir Heterogeneity by Capacitance-resistance Model in Water-flooding Projects [Volume 5, Issue 3, 2016, Pages 1-13]
  • Mehrpooya, Mehdi Exergoeconomic Evaluation of LNG and NGL Co-production Process Based on the MFC Refrigeration Systems [Volume 5, Issue 3, 2016, Pages 45-61]
  • Moghadasi, Jamshid A Novel Technique for Determination of the Onset of Alkane Induced Asphaltene Precipitation Using Accurate Density Measurements [Volume 5, Issue 4, 2016, Pages 25-35]
  • Moghri, Iman Preparation and Characterization of Structure and Corrosion Resistivity of Polyurethane /Montmorillonite/Cerium Nitrate Nanocomposites [Volume 5, Issue 2, 2016, Pages 100-110]
  • Mortazavi, Elham An Influence of Polymer-Alkaline and Nanoparticles as Chemical Additives on the Immiscible Displacement and Phase Relative Permeability [Volume 5, Issue 3, 2016, Pages 14-31]
N
  • Neshat, Jalal Evaluation of a Naturally-derived Deflocculant (Terminalia Chebula) in Bentonite Dispersions [Volume 5, Issue 2, 2016, Pages 21-44]
P
  • Pahlavan, Maryam Modeling and Simulation of Claus Unit Reaction Furnace [Volume 5, Issue 1, 2016, Pages 42-52]
  • Pourafshary, Peyman Characterization of Reservoir Heterogeneity by Capacitance-resistance Model in Water-flooding Projects [Volume 5, Issue 3, 2016, Pages 1-13]
R
  • Rahmati, Hamid The Effect of Simultaneous Incorporation of PTFE Nanoparticles and Carbon Nanotubes on the Tribological Behavior of Ni-P Coating [Volume 5, Issue 3, 2016, Pages 73-81]
  • Rasaei, Mohammad Reza A Novel Integrated Approach to Oil Production Optimization and Limiting the Water Cut Using Intelligent Well Concept: Using Case Studies [Volume 5, Issue 1, 2016, Pages 27-41]
  • Rasaei, Mohammad Reza Characterization of Reservoir Heterogeneity by Capacitance-resistance Model in Water-flooding Projects [Volume 5, Issue 3, 2016, Pages 1-13]
  • Rastegar, Abdossamad Application of Modified LECA in Removing Nickel from Wastewater [Volume 5, Issue 1, 2016, Pages 1-12]
  • Roshanipour, Babak Design and Practical Implementation of a New Markov Model Predictive Controller for Variable Communication Packet Loss in Network Control Systems [Volume 5, Issue 1, 2016, Pages 53-64]
S
  • Saeedi Dehaghani, Amir Hossein Simulation and Assessment of Surfactant Injection in Fractured Reservoirs: A Sensitivity Analysis of some Uncertain Parameters [Volume 5, Issue 1, 2016, Pages 13-26]
  • Salahshoor, Karim Design and Practical Implementation of a New Markov Model Predictive Controller for Variable Communication Packet Loss in Network Control Systems [Volume 5, Issue 1, 2016, Pages 53-64]
  • Shadizadeh, Seyed Reza Evaluation of a Naturally-derived Deflocculant (Terminalia Chebula) in Bentonite Dispersions [Volume 5, Issue 2, 2016, Pages 21-44]
  • Shahsavari, Sajedeh A Numerical Study of the Sour Gas Reforming in a Dielectric Barrier Discharge Reactor [Volume 5, Issue 4, 2016, Pages 36-52]
  • Sharafi, Amir Hydroisomerization of n-Pentane over Pt/Mordenite Catalyst: Effect of Feed Composition and Process Conditions [Volume 5, Issue 2, 2016, Pages 84-99]
  • Shariati, Ahmad A Consequence Analysis of the Explosion of Spherical Tanks Containing Liquefied Petroleum Gas (LPG) [Volume 5, Issue 3, 2016, Pages 32-44]
  • Sheikh, Lawangin Application of Well Log Analysis to Assess the Petrophysical Parameters of the Early Eocene Sui Main Limestone (SML) in Kharnhak-1 Well, Middle Indus Basin, Pakistan [Volume 5, Issue 2, 2016, Pages 1-20]
  • Shirvani, Mansour Modeling and Simulation of Kuhni Extraction Column Using a Rate-based Model [Volume 5, Issue 4, 2016, Pages 53-67]
  • Shishesaz, Mohammadreza Preparation and Characterization of Structure and Corrosion Resistivity of Polyurethane /Montmorillonite/Cerium Nitrate Nanocomposites [Volume 5, Issue 2, 2016, Pages 100-110]
  • Shishesaz, Mohammad Reza Effects of Surface Treatment on Corrosion Resistance of 304L and 316L Stainless Steel Implants in Hank’s Solution [Volume 5, Issue 1, 2016, Pages 65-72]
  • Shojaei, Fahimeh A Numerical Study of the Sour Gas Reforming in a Dielectric Barrier Discharge Reactor [Volume 5, Issue 4, 2016, Pages 36-52]
  • Solaimany Nazar, Ali Reza Assessing the Asphaltene Adsorption on Metal Oxide Nanoparticles [Volume 5, Issue 3, 2016, Pages 62-72]
T
  • Tahershamsi, Amir Hosein Modeling and Simulation of Kuhni Extraction Column Using a Rate-based Model [Volume 5, Issue 4, 2016, Pages 53-67]
Z
  • Zaarei, Davood Preparation and Characterization of Structure and Corrosion Resistivity of Polyurethane /Montmorillonite/Cerium Nitrate Nanocomposites [Volume 5, Issue 2, 2016, Pages 100-110]
  • Zanganeh, Ahmad Reza Simulation and Assessment of Surfactant Injection in Fractured Reservoirs: A Sensitivity Analysis of some Uncertain Parameters [Volume 5, Issue 1, 2016, Pages 13-26]
  • Zareei, Hadi A Consequence Analysis of the Explosion of Spherical Tanks Containing Liquefied Petroleum Gas (LPG) [Volume 5, Issue 3, 2016, Pages 32-44]
  • Zia, Asad Application of Well Log Analysis to Assess the Petrophysical Parameters of the Early Eocene Sui Main Limestone (SML) in Kharnhak-1 Well, Middle Indus Basin, Pakistan [Volume 5, Issue 2, 2016, Pages 1-20]