Petroleum Engineering
Siavash Ashoori; Ehsan Safavi; Jamshid Moghaddasi; Parvin Kolahkaj
Abstract
Formation damage is reported during the secondary and tertiary stages of reservoir lifespan. One of the unpleasant sequences of formation damage caused by fine particles is permeability reduction due to pore plugging and bridging. The fine particles might exist initially in a porous medium or be introduced ...
Read More
Formation damage is reported during the secondary and tertiary stages of reservoir lifespan. One of the unpleasant sequences of formation damage caused by fine particles is permeability reduction due to pore plugging and bridging. The fine particles might exist initially in a porous medium or be introduced by external sources. In addition, there is a variety of particle types and sizes. The current research focuses on the effects of non-swelling clay minerals motions, such as the laminar ones found in Iranian sandstone reservoirs, on permeability. For this purpose, sand packs in various glass bead sizes and containing aluminum oxide as fine particles were designed to scrutinize the motion of fine particles under various pressure differences, flow rates, and concentrations. It was concluded that for each of the three sand packs regarded as the porous media in this study and composed of fine glass beads with different sizes, there is a critical flow rate as a function of glass bead size. For the flow rates lower than the critical flow rate, bridges form stably and lead to the most severe formation damage. After reaching the critical flow rate, the bridges weaken and break, and relative permeability will be independent of the flow rate. It was deduced that permeability reduction and formation damage are directly proportional to particle concentration and inversely proportional to glass bead size.
Saeed Naseri; Jamshid Moghadasi; Mohammad Jamialahmadi
Abstract
Sulfate scale deposition (BaSO4, CaSO4, and SrSO4) is a common problem in oilfield operations around the world, which causes significant formation damage during production and injection activities. This paper presents the results of an experimental study on the permeability reduction of porous media ...
Read More
Sulfate scale deposition (BaSO4, CaSO4, and SrSO4) is a common problem in oilfield operations around the world, which causes significant formation damage during production and injection activities. This paper presents the results of an experimental study on the permeability reduction of porous media due to sulfate scale deposition. A set of experiments were conducted to investigate the effects of cation (Ba2+, Ca2+, and Sr2+ ions) concentration and the number of cation species on the permeability reduction resulting from single sulfate scales (single BaSO4, CaSO4, and SrSO4 scales) and mixed BaSO4, CaSO4, and SrSO4 scale deposition in porous media during water injection. The experiments were performed at a constant temperature of 70 °C and a constant anion (SO42- ion) concentration of 3968 ppm in the pack of glass beads as the porous media. The results show that the intensity of permeability reduction increases with increasing cation concentration. These results also declare that the permeability reduction of porous media due to mixed BaSO4, CaSO4, and SrSO4 is clearly severer than single scales.
