Petroleum Engineering
Seyed Mohammadreza Mousavi; Saeed Jafari; Mahin Schaffie; Saeid Norouzi Apourvari
Abstract
Ultrasonic irradiation is a new, economic, and environmentally friendly technique for treating asphaltene aggregation in petroleum industry. In this study, the effect of ultrasonic radiation on asphaltene formation is investigated using conventional optical microscopy, viscosity measurement, and Fourier-transform ...
Read More
Ultrasonic irradiation is a new, economic, and environmentally friendly technique for treating asphaltene aggregation in petroleum industry. In this study, the effect of ultrasonic radiation on asphaltene formation is investigated using conventional optical microscopy, viscosity measurement, and Fourier-transform infrared spectroscopy (FTIR). To this end, five crude oil samples, collected from different reservoirs, are used, and the effect of ultrasonic radiation on the structure of the crude oils is investigated at various exposure times. The results show that, at an optimum radiation time, the ultrasonic waves can break the asphaltene clusters and shift the size distribution of the asphaltene aggregate to a smaller size. In addition, the FTIR analysis reveals structural changes in the composition of the crude oil after the ultrasonic irradiation. By increasing the ultrasound exposure time, the viscosity of the asphaltenic oil first decreases to a minimum before rising again. Moreover, the measurement of asphaltene and resin content of the crude oils indicates that at exposure times longer than the one leading to the minimum viscosity, resin molecules are broken upon exposure to ultrasound. This can be the main reason for the existence of an optimum time in the application of ultrasonic radiation, after which the percentage of asphaltene particles and the viscosity of the crude oils increase.
Behnam Keshavarzi; Mohammad Javad Shojaei; Mohammad Hossein Ghazanfari; Cyrus Ghotbi
Abstract
It has been proved that ultrasonic energy can considerably increase the amount of oil recovery in an immiscible displacement process. Although many studies have been performed on investigating the roles of ultrasonic waves, based on the best of our knowledge, little attention has been paid to evaluate ...
Read More
It has been proved that ultrasonic energy can considerably increase the amount of oil recovery in an immiscible displacement process. Although many studies have been performed on investigating the roles of ultrasonic waves, based on the best of our knowledge, little attention has been paid to evaluate wave attenuation parameter, which is an important parameter in the determination of the energy delivered to the porous medium. In this study, free fall gravity drainage process is investigated in a glass bead porous medium. Kerosene and Dorud crude oil are used as the wetting phases and air is used as the non-wetting phase. A piston-like displacement model with considering constant capillary pressure and applying Corey type approximation for relative permeabilities of both wetting and nonwetting phases is applied. A pressure term is considered to describe the presence of ultrasonic waves and the attenuation factor of ultrasonic waves is calculated by evaluating the value of external pressure applied to enhance the flow using the history matching of the data in the presence and absence of ultrasonic waves. The results introduce the attenuation factor as an important parameter in the process of ultrasonic assisted gravity drainage. The results show that only a low percentage of the ultrasonic energy (5.8% for Dorud crude oil and 3.3% for kerosene) is delivered to the flow of the fluid; however, a high increase in oil recovery enhancement (15% for Dorud crude oil and 12% for Kerosene) is observed in the experiments. This proves that the ultrasonic waves, even when the contribution is not substantial, can be a significantly efficient method for flow enhancement.