Petroleum Engineering
Amin Daryasafar; Mohammad FathiNasab; Giovanni Da Prat; Riyaz Kharrat
Abstract
In this paper, decline curve analysis is used for estimating different parameters of bounded naturally fractured reservoirs. This analysis technique is based on rate transient technique, and it is shown that if production rate is plotted against time on a semi-log graph, straight lines are obtained that ...
Read More
In this paper, decline curve analysis is used for estimating different parameters of bounded naturally fractured reservoirs. This analysis technique is based on rate transient technique, and it is shown that if production rate is plotted against time on a semi-log graph, straight lines are obtained that can be used to determine important parameters of the closed fractured reservoirs. The equations are based on Warren and Root model. The comparison between the results of this technique and those of the conventional methods confirms its high proficiency in transient well testing. It should be noted that in conventional decline curve methods, parameters such as interporosity flow parameter and storage capacity ratio must be first obtained by previous methods like the build-up analysis, but in the proposed method all the main reservoir parameters can be calculated directly, which is one of the advantages of this method. This paper focuses on the interpretation of rate tests, and the starting points and slopes of straight lines are utilized with proper equations to solve directly for various properties. The main important aspect of the presented method is its accuracy since analytical solutions are used for calculating reservoir parameters.
Misagh Delalat; Riyaz Kharrat
Abstract
The gas-assisted gravity drainage (GAGD) process is designed and practiced based on gravity drainage idea and uses the advantage of density difference between injected CO2 and reservoir oil. In this work, one of Iran western oilfields was selected as a case study and a sector model was simulated based ...
Read More
The gas-assisted gravity drainage (GAGD) process is designed and practiced based on gravity drainage idea and uses the advantage of density difference between injected CO2 and reservoir oil. In this work, one of Iran western oilfields was selected as a case study and a sector model was simulated based on its rock and fluid properties. The pressure of CO2 gas injection was close to the MMP of the oil, which was measured 1740 psia. Both homogeneous and heterogeneous types of fractures were simulated by creating maps of permeability and porosity. The results showed that homogeneous fractures had the highest value of efficiency, namely 40%; however, in heterogeneous fractures, the efficiency depended on the value of fracture density and the maximum efficiency was around 37%. Also, the effect of injection rate on two different intensities of fracture was studied and the results demonstrated that the model having higher fracture intensity had less limitation in increasing the CO2 injection rate; furthermore, its BHP did not increase intensively at higher injection rates either. In addition, three different types of water influxes were inspected on GAGD performance to simulate active, partial, and weak aquifer. The results showed that strong aquifer had a reverse effect on the influence of GAGD and almost completely disabled the gravity drainage mechanism. Finally, we inventively used a method to weaken the aquifer strength, and thus the gravity drainage revived and efficiency started to increase as if there was no aquifer.