Petroleum Engineering
Mehdi Rezaei Abiz; Saeid Norouzi Apourvari; Saeed Jafari; Mahin Schaffie
Abstract
Although experimental studies confirmed the effectiveness of nanoparticles in enhanced oil recovery applications, no comprehensive investigation has been carried out to reveal the effect of different subsurface factors on this improvement. Proper application of nanoparticles mainly depends on their ability ...
Read More
Although experimental studies confirmed the effectiveness of nanoparticles in enhanced oil recovery applications, no comprehensive investigation has been carried out to reveal the effect of different subsurface factors on this improvement. Proper application of nanoparticles mainly depends on their ability to travel long distances within a reservoir without agglomeration, retention, and blocking the pore throats. This study strengthens our understanding of the effect of the main subsurface factors on the nanofluid-assisted enhanced oil recovery. To this end, a transport approach utilizing the kinetic Langmuir model is developed and validated using experimental data. After that, the effects of reservoir rock type and its properties (clay content and grain size), the salinity of injected fluid, and the reservoir temperature on the transport and retention of nanoparticles in porous media concerning enhanced oil recovery methods are investigated. Since the concentration of nanoparticles in the injected fluid and on the rock surface (as deposited) control the mobility and wettability alteration, the effect of subsurface factors and salinity of injected fluid on this deposition is also analyzed. The results showed that the rock type and its properties significantly affect the transport and retention of nanoparticles in porous media. Brine salinity also has the most significant impact on the amount of nanoparticles deposited on the rock surface. The surface covered by nanoparticles increased from 10% to 82% after changing salinity from 3 wt % NaCl to the API brine.
Petroleum Engineering
Seyed Mohammadreza Mousavi; Saeed Jafari; Mahin Schaffie; Saeid Norouzi Apourvari
Abstract
Ultrasonic irradiation is a new, economic, and environmentally friendly technique for treating asphaltene aggregation in petroleum industry. In this study, the effect of ultrasonic radiation on asphaltene formation is investigated using conventional optical microscopy, viscosity measurement, and Fourier-transform ...
Read More
Ultrasonic irradiation is a new, economic, and environmentally friendly technique for treating asphaltene aggregation in petroleum industry. In this study, the effect of ultrasonic radiation on asphaltene formation is investigated using conventional optical microscopy, viscosity measurement, and Fourier-transform infrared spectroscopy (FTIR). To this end, five crude oil samples, collected from different reservoirs, are used, and the effect of ultrasonic radiation on the structure of the crude oils is investigated at various exposure times. The results show that, at an optimum radiation time, the ultrasonic waves can break the asphaltene clusters and shift the size distribution of the asphaltene aggregate to a smaller size. In addition, the FTIR analysis reveals structural changes in the composition of the crude oil after the ultrasonic irradiation. By increasing the ultrasound exposure time, the viscosity of the asphaltenic oil first decreases to a minimum before rising again. Moreover, the measurement of asphaltene and resin content of the crude oils indicates that at exposure times longer than the one leading to the minimum viscosity, resin molecules are broken upon exposure to ultrasound. This can be the main reason for the existence of an optimum time in the application of ultrasonic radiation, after which the percentage of asphaltene particles and the viscosity of the crude oils increase.
